Solar Mounting System Double-Pole Structure Mg Al Zn Coated PV Bracket CE Certificated Solar Bracket Factory Direct Wholesale

• Customization: Available
• After-sales Service: 24h
• Warranty: 12years
• Model NO.: PD-GM-04
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• Wind Speed: 60m/S
• Snow Load: 1.4kn/M2
• Lead Time: 7-15 Days
• Surface Treatment: Magnesium Aluminum Zinc
• Standard: AS/NZS1170/Jisc8955:2017
• Transport Package: Each Items Packed in Cartons, Several Cartons Pack
• Specification: Normal
• Trademark: PandaSolar
• Origin: Fujian, China
• Production Capacity: 10000
• Package Size: 240.00cm * 110.00cm * 110.00cm
• Package Gross Weight: 1000.000kg

Product Description

About Panda solar Hot DIP Galvanized Ground Mounting Frame System:

GM3 is the No.3 HDG solar ground structure design developed by PandaSolar, which is made of fully hot-dip galvanized steel.
The thickness of hot-dip galvanizing reaches 80μm, which meets the environmental conditions of most countries
The structural frame has continuous rows of holes, the installation fault tolerance rate is large, and the installation is simple and greatly reduces the construction cost.
GM3 HDG solar mounting system is usually use ground screw foundation, 1200mm, 1600mm, 1800mm or 2000mm height to meet different geological conditions.

Structural features:

1. Ground screw foundation design: Ground screw with adjustable flange plate
2. Quick installation
3. Pre-assembled base and adjustable flange plate, both realize the front-rear-left-right of the aluminum mounting bracket is adjustable, which is very convenient for installation.
4. Have different solar structure design for choose: N shape,  VI shape and W shape   

 

Installation Diagram:

Installing Ground Screws: The first step in installing a ground mount solar system is to install the ground screws. These screws are used to anchor the support structure to the ground. The screws are drilled into the soil using specialized equipment. The depth of the screw depends on the soil type, and it must be sufficient to hold the weight of the entire system.

Install the Beam and Diagonal Support Pole: After the concrete has dried, it's time to install the beam and diagonal support pole. Connect the diagonal support pole to the top of the pole using bolts and nuts. Next, attach the beam to the diagonal support pole and secure it with nuts and bolts.

 

Installing Rails :After the beam and diagonal support pole are in place, attach the rail that will support the solar panels. The rail should be attached to the beam using brackets and bolts. Ensure that the rail is level before moving to the next step.

Installing Solar Panels : Finally, attach the solar panels to the rail using mounting hardware. Make sure that each panel is securely fastened to the rail. After all the panels are attached, connect them in series or parallel, depending on the system's requirements. Then, connect the wiring to the panels and run the wires down the pole.

 
Our Advantages:
1.Highly pre-assemble
2.Great flexibility in different designs
3.Long service life
4.Accept OEM
5.Easy installation

Product Parameters

Material	Structure:HDG steel    Components: HDG & AI6005-5(Anodized)
Application	Commercial and Residential installation
Tilt Angle	0-60°
Wind Speed	0-60 m/s
Snow Load	0-150cm
Ground Clearance	0-1m
Design Standard	AS/NZS 1170, DIN 1055, JIS C8955: 2017, International Building Code IBC 2009
Warranty	12 years

 

Other products

 

 

Company Profile

Xiamen Panda Solar Technology Co., Ltd office was established in 2019 and is located in Xinglinwan Business District, Jimei District, a beautiful tourist city, with professional design team and sales team.

PandaSolar is committed to developing solar clean energy mounting systems, has developed Solar Ground Mounting System, Solar Agriculture Greenhouse Mounting System, Solar Tile Roof Mounting System, Solar Metal Roof Mounting System, Flat Concrete Roof Mounting System, Solar Carport Mounting System, Solar Fence and Solar Mounting Accessories, etc.

Products are popular in Europe, Southeast Asia, the Middle East, southern Africa and Latin America.

Its has provides green energy for the world where human beings live and create more possibilities to become the most reliable partner in the solar industry.

Factoty

 

Workshop-Aluminum Material:
PandaSolar has a professional aluminum alloy product processing workshop,  cutting, drilling, stamping, forging and other work are completed independently.
Professional production team can accept products with high customization/precision requirements.
Workshop-Steel Material:
PandaSolar has a professional steel/Magnesium aluminum zinc/S350GD/S450GD processing workshop as well, 6 production lines, and several molding machines. According to different projects, it can complete cutting and holes processing, with productivity of 40-50MW per month

Packaging & Shipping

 

 

 

Certifications

 

 

FAQ

 

♥: What's your delivery time?

A: 12days

♥: Can you send the samples?

A: Yes, free samples for your test. 

♥: Are you manufacture?

A: Yes, Our production experience is more than 12 years.

♥: Do you have OEM service?

A: Yes, we accept OEM service.

♥: How can I get the best price?

A: Send an inquiry to us and a professional will quote you.